Wireless Light Switch 433MHz Remote Control 1/2/3Gang Interruptor Wall Smart Lighting Switch 10A 110V 220V For Lamp LED

Product name:Wireless Wall Switch
working frequency:433MHZ
Power consumption in standby mode:<luA
Transmitter power:<10mW
Working way:Wireless control
Coding way:EV1527 learning code
Modulation:ASK
Working temperature:-10″C~+70*C
Size:86*86*15mm

– Multi switches can control different receivers.Save energy,avoid darkness.

– Working with all kinds of Lights and Ceiling Fan.LED,CFL,Fluorescent lamp can load 300W,other can load 2500w.

– It is a 86 wall panel that can be stuck onto anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver.

Note : A smart switch can only store 15 buttons(on the receiver).
If more than 15 sets of buttons are saved,the frist set of data is automatically overwritten.

Pairing Method

How to get the signal
Step 1: Press the learning button(on the Receiver) twice. Wait for 3 seconds;
Step 2: Press one button on the remote control. Wait for 3 seconds. Succeed.
How to clear the signal
Only one step :Press the learning button(on the Receiver) 8 times. Wait for 3 seconds;controller (Receiver)

1) Working voltage: AC85-240V 60HZ/50HZ

2) Working frequency: 433MHZ

3) Power consumption in standby mode: <0.3W

4) Load power: <1100W

5) Receiving sensitivity: -108dBM

6) Working way:wireless control

7) Coding way: learning code

8) Modulation: ASK

9) Working temperature: -10*C~+70″C

10) Size: 47.4*42*22.8 (mm)